A Step-by-Step Guide: Replacing Eyeballs of Silicone Sex Dolls

When it comes to the design of eyeballs for sex dolls, there are typically two types: half-ball eyeballs and fully movable eyeballs. TPE sex dolls commonly use half-ball eyeballs, which are secured with cotton for improved stability and mobility. These eyeballs can be easily removed and replaced without much effort.

In this article, we will discuss the proper procedure for changing the fully movable eyeballs of sex dolls with hard silicone heads. We will use an Irontech doll as an example to demonstrate the process.

Tools for Preparation

1、Round-tip stick；2、Tweezers；3、Water-based lubricant (recommended step)；4、New eyeballs

Step-by-Step Replacement

Here is a step-by-step guide on how to replace the eyeballs of a sex doll with a hard silicone head:

Step 1: Gently insert a round-tip stick into the side of the eye socket to carefully pry out and remove the old eyeballs.

Step 2: Apply a small amount of water-based lubricant to the edge of the eye sockets and the back of the new eyeballs.

Step 3: Insert the new eyeballs into the eye sockets, ensuring they are properly aligned.

Step 4: Use a pair of tweezers to slightly adjust the position and angle of the eyeballs to your desired look.

For a visual demonstration of how to remove the old eyeballs and install the new ones on an Irontech doll with a hard silicone head, you can refer to the video provided.

Warm Notice:

1. It is important to avoid frequent replacement of the eyeballs on hard silicone heads, as this can potentially damage the surrounding eye structure or ruin the eye makeup.

2. To ensure a smooth installation of the eyeballs into the eye sockets, it is recommended to use a small amount of water-based lubricant before inserting them.